Contains file Edit related commands.

Returns to the Project tab.

Minimizes and maximizes the ribbon bar menu.

Displays the Preferences dialog.

Displays the Online Help system.

Add line numbers to the g-code file.

Insert spaces (i.e., delimiters) between g-codes.

Convert g-code to all UPPERCASE text.

Delete line numbers from the g-code file.

Delete spaces (i.e., delimiters) between g-codes.

Convert g-code to all lowercase text.

Cut the selected text to the clipboard.

Copy the selected text to the clipboard.

Paste the selected text to the current cursor location.

Find text within the G-Code file.

Find & Replace text within the G-Code file.

Undo the last command.

Print the G-Code file currently loaded in the editor.

Save the G-Code file currently loaded in the editor.

Display information about the current g-code file.

Go to the Bottom (End) of the G-Code file.

Go to the Top (Start) of the G-Code file.

Go to the next Tool Change code.

Go to the next Spindle code.

Go to the next Feedrate code.

Cut the selected text to the clipboard.

Copy the selected text to the clipboard.

Paste the selected text to the current cursor location.

Find text within the G-Code file.

Find & Replace text within the G-Code file.

Undo the last command.

Stock Model Visibility: Turn on/off stock model

Part Model Visibility: Turn on/off part model display during simulation.

Toolpath Visibility: Turn on/off toolpath display

Follow Toolpath Display: The toolpath is displayed as it follows the behind the movement of the tool (i.e., you will only see the toolpath after the tool passes.

Trace Toolpath Display: The toolpath is not displayed as it follows the behind the movement of the tool (i.e., you will only see the toolpath before the tool passes.

Segment Toolpath Display: The toolpath is only displayed for the segment that the tool is currently on.