Available in: |
Xpress |
Standard |
Expert |
Professional |
Premium |
There are two material removal simulation modes (or models) available for use. The Voxel model can only be used for 2½ and 3 axis toolpaths. The main advantage of this model is very rapid processing times. The Polygonal model is necessary for simulating all 4 axis toolpaths. This model is more comprehensive and results in better display quality, however at the expense of speed.
|
If you are simulating 4 or 5 axis toolpaths make sure that you are using the
To change the simulation module in MILL module, select Simulation Preferences located under the Simulate tab or select CAM Preferences > Simulation Settings button under the Machining Browser and select the appropriate model for simulation.
Refer to Simulation Preferences for a detailed description.