Upon successful installation, you can run any VisualCAM module in Demo mode without an Activation Code. Your product needs to be registered with MecSoft Corporation and a valid Activation Code obtained before it can become fully operable. Select from the two options below.
New users can run in Demo mode prior to obtaining an Activation Code or after Releasing your current license: 1.Launch the software. 2.From the Get Started! dialog, select:
3.From the Choose Demo Module & Configuration dialog, first select the configuration from the drop-down list (Express, Standard, Expert, Professional or Premium) and then choose the Module to run. The module and configuration with launch automatically. In Demo mode you cannot post G-code or save any CAM data.
|
Existing users can run any VisualCAM module and/or configuration in Demo mode without an Activation Code. The only requirement is that the computer is NOT connected to the internet. 1.Exit the existing MecSoft product. 2.Unplug the internet cable from your PC. 1.Launch the software. 2.From the Get Started! dialog, select Run CAM Demo.
3.From the Choose Demo Module & Configuration dialog, first select the configuration from the drop-down list (Express, Standard, Expert, Professional or Premium) and then choose the Module to run. The module and configuration with launch automatically. In Demo mode you cannot post G-code or save any CAM data.
|