Post Variables List

Variable

Description

[ABS_ANGLE]

[ABS_ANGLE_SECONDARY]

[ANGLE]

[ANGLE_SECONDARY]

[APPROACH_FEED]

[CENTER_X]

[CENTER_Y]

[CENTER_Z]

[CIR_PLANE]

[COMMENT]

Output comments.

[CURR_X]

The X coordinate of current point.

[CURR_X_WCS]

The X coordinate of current point in World Coordinates

[CURR_Y]

The Y coordinate of current point.

[CURR_Y_WCS]

The Y coordinate of current point in World Coordinates

[CURR_Z]

The Z coordinate of current point.

[CURR_Z_WCS]

The Z coordinate of current point in World Coordinates

[CUT_FEED]

[CYCL_1/TPI]

1/TPI (only for TAP cycle)

[CYCL_CLEAR+DEPTH]

Drill Depth + Clear. (only for cycles except C-SINK)

[CYCL_CLEAR+INCR]

[CYCL_CLEAR]

Clearance. (only for cycles)

[CYCL_CSINK_DEPTH+CLEAR]

Drill Depth + Clear. (only for C-SINK cycle)

[CYCL_CSINK_DEPTH]

Drill Depth. (only for C-Sink cycle)

[CYCL_DEPTH]

Drill Depth. (only for cycles except C-SINK)

[CYCL_DWELL]

Dwell. (only for cycles)

[CYCL_INCR]

Step Increment. (only for cycles)

[CYCL_IPM]

IPM. (only for cycles except TAP)

[CYCL_IPR]

IPR. (only for TAP cycle)

[CYCL_NEG_CLEAR+DEPTH]

-( Drill Depth + Clear). (only for cycles except C-SINK)

[CYCLE_NUM_STEPS]

[CYCL_ORIENT]

Orient. (only for cycles)

[CYCL_SCALED_DWELL]

Dwell * Scale Factor (only for cycles)

[CYCL_TPI]

[CYCL_Z+CLEAR]

Next Z + Clearance. (only for cycles)

[CYCL_Z+DEPTH+CLEAR]

Next Z + Depth + Clearance. (only for cycles)

[CYCL_Z+DEPTH]

Next Z + Depth. (only for cycles)

[CYCL_Z-DEPTH]

Next Z - Depth. (only for cycles)

[DELIMITER]

Delimiter definition.

[DEPART_FEED]

Outputs the Departure feedrate value for the currently operation.

[ENGAGE_FEED]

Outputs the Engage feedrate value for the currently operation.

[EOB]

The end of block character.

[EXTRUSION]

[EXTRUSION_BLK]

[EXTRUSION_CODE]

[FEEDRATE]

FeedRate Value.

[FEEDRATE_BLK]

FeedRate Block.

[FEEDRATE_CODE]

Outputs the Feedrate code

[FEEDRATE_UNITS_CODE]

Outputs the Feedrate Units code

[FIRST_TOOL_NUM]

[G_CODE]

The next G-Code.  This is translated to linear, rapid, arc or cycle G-Code.

[HELIX_ANGLE]

[HELIX_CCW_ARC]

[HELIX_CW_ARC]

[HELIX_LEAD]

[HELIX_NUM_REV]

[HELIX_RADIUS]

[HELIX_TOTAL_DEPTH]

[INPUTFILE_NAME]

[INPUTFILE_NAME_LONG]

[INV_TIME_FEEDRATE_OFF]

[INV_TIME_FEEDRATE_ON]

[LINEAR]

The linear motion code.

[MAXZ]

[MINZ]

[MOP_NAME]

[NEXT_ABS_X_WCS]

The next absolute X coordinate point in World Coordinates.

[NEXT_ABS_Y_WCS]

The next absolute Y coordinate point in World Coordinates.

[NEXT_ABS_Z_WCS]

The next absolute Z coordinate point in World Coordinates.

[NEXT_I]

[NEXT_J]

[NEXT_K]

[NEXT_NONMDL_E]

[NEXT_NONMDL_I]

[NEXT_NONMDL_J]

[NEXT_NONMDL_K]

[NEXT_NONMDL_L]

[NEXT_NONMDL_R]

[NEXT_NONMDL_X]

The next non-modal X coordinate point in local Machine Coordinates.

[NEXT_NONMDL_X_WCS]

The next non-modal X coordinate point in World Coordinates.

[NEXT_NONMDL_Y]

The next non-modal Y coordinate point in local Machine Coordinates.

[NEXT_NONMDL_Y_WCS]

The next non-modal Y coordinate point in World Coordinates.

[NEXT_NONMDL_Z]

The next non-modal Z coordinate point in local Machine Coordinates.

[NEXT_NONMDL_Z_WCS]

The next non-modal Z coordinate point in World Coordinates.

[NEXT_R]

[NEXT_TOOL_NAME]

[NEXT_TOOL_NUM]

[NEXT_X]

The next X coordinate point in Machine Coordinates.

[NEXT_X_WCS]

The next X coordinate point in World Coordinates.

[NEXT_Y]

The next Y coordinate point in Machine Coordinates.

[NEXT_Y_WCS]

The next Y coordinate point in World Coordinates.

[NEXT_Z]

The next Z coordinate point in Machine Coordinates.

[NEXT_Z_WCS]

The next Z coordinate point in World Coordinates.

[OUTPUTE_MODE_CODE]

[OUTPUT_UNITS_CODE]

English or Metric outputs code.

[OUTPUTFILE_NAME]

[OUTPUT_FILENAME_LONG]

[PARTNAME]

[PARTNUM]

[PLUNGE_FEED]

[POST_NAME]

[POST_NAME_LONG]

[PREV_TOOL_ADJST_REG]

[PREV_TOOL_CUTCOM_REG]

[PREV_TOOL_NUM]

[PREV_TOOL_NUM_FLUTES]

[PREV_TOOL_ZOFFSET]

[RAPID]

The rapid motion code.

[RAPID_FEED]

[RETRACT_FEED]

[ROTATION_AXIS]

[ROTATION_AXIS_SECONDARY]

[ROTATION_DIR]

[ROTATION_DIR_SECONDARY]

[ROTATION_FEEDVALUE]

[ROTATION_MODE]

[RT_NXT_X]

The next X coordinate. (Modal)

[RT_NXT_Y]

The next Y coordinate. (Modal)

[RT_NXT_Z]

The next Z coordinate. (Modal)

[RT_NXT_NONMDL_X]

The next X coordinate. (NonModal)

[RT_NXT_NONMDL_Y]

The next Y coordinate. (NonModal)

[RT_NXT_NONMDL_Z]

The next Z coordinate. (NonModal)

[SEQ_PRECHAR]

Letter that is prefixed before the sequence number

[SEQNUM]

The actual sequence number.

[SPINDLE_ARC]

Spindle direction.

[SPINDLE_BLK]

Spindle Block.

[SPINDLE_CODE]

[SPINDLE_SPD]

Spindle speed.

[SPINDLE_SPD_MAX]

[SPINDLE_SPD_TYPE]

[SPIRAL_ANGLE]

[SPIRAL_CCW_ARC]

[SPIRAL_CW_ARC]

[SPIRAL_END_RADIUS]

[SPIRAL_LEAD]

[SPIRAL_NUM_REV]

[SPIRAL_START_RADIUS]

[SPIRAL_TOTAL_LENGTH]

[START_CHAR]

The program start character.

[START_POSITION_X]

[START_POSITION_Y]

[START_POSITION_Z]

[START_X]

The X coordinate of start point.

[START_X_WCS]

The X coordinate of start point in World Coordinates.

[START_Y]

The Y coordinate of start point.

[START_Y_WCS]

The Y coordinate of start point in World Coordinates.

[START_Z]

The Z coordinate of start point.

[START_Z_WCS]

The Z coordinate of start point in World Coordinates.

[STEP_NEXT_X]

[STEP_NEXT_Y]

[STEP_NEXT_Z]

[STEP_START_DEPTH]

[STOCK_LENGTH_X]

UNDEFINED is output if there is no stock defined when posting occurs.

[STOCK_LENGTH_Y]

[STOCK_LENGTH_Z]

[STOCK_MAX_X]

[STOCK_MAX_Y]

[STOCK_MAX_Z]

[STOCK_MIN_X]

[STOCK_MIN_Y]

[STOCK_MIN_Z]

[STOP_CHAR]

The program end character.

[TEMPERATURE]

[TEMPERATURE_BED_SET_CODE]

[TEMPERATURE_BED_WAIT_CODE]

[TEMPERATURE_EXTRUDER_SET_CODE]

[TEMPERATURE_EXTRUDER_WAIT_CODE]

[TEMPERATURE_SET_BLK]

[TEMPERATURE_SET_CODE]

[TEMPERATURE_WAIT_BLK]

[TEMPERATURE_BED_WAIT_CODE]

[THREAD_ANGLE]

[THREAD_DEPTH]

[THREAD_DIR]

[THREAD_FINISH_NUMCUTS]

[THREAD_FINISH_STOCK]

[THREAD_FINISH_Z]

[THREAD_FIRST_DEPTH]

[THREAD_INFEED_TYPE]

[THREAD_LENGTH]

[THREAD_MAJOR_DIR]

[THREAD_MIN_DEPTH]

[THREAD_MINOR_DIA]

[THREAD_PITCH]

[THREAD_PULL_OUT_DIST]

The pull out value is specified under G76 parameters in threading mop in turning.

[THREAD_TAPER]

[TIME_STAMP]

[TOOL_ADJ_REG]

Tool Adjust Register number.

[TOOL_CHG_PT_X]

[TOOL_CHG_PT_Y]

[TOOL_CHG_PT_Z]

[TOOL_CUTCOM_REG]

[TOOL_DIA]

Tool Diameter.

[TOOL_LENGTH]

Tool length.

[TOOL_NAME]

[TOOL_NUM]

Tool number.

[TOOL_NUM_FLUTES]

[TOOL_RAD]

Tool Radius.

[TOOL_ZOFFSET]

[VMPFILE_NAME]

[WMPFILE_NAME_LONG]

[WORK_OFFSET_NUM]

[WORK_OFFSET_PREFIX]

[ZFEEDRATE]

INV_TIME_FEEDRATE_FLAG